- Leaf length up to 2.50 mt
- Sturdy aluminum, die-casting structure
- Steel and cast gears obtained from solid
- Aluminum articulated anti-shearing arm, powder coated
- Very quiet operation
- High-performance electric motor
- Manual release with personalized key
- Predisposition for remote release by cable
- Mechanical limit switch in opening and closing
- Lithium grease lubrications of mechanical parts against corrosion, oxidation and rust
- Opening 120°
- Suited for installation on large pillars
- Only one version for right and left installations
- Control panel with obstacle detection
- Anti-squashing system (en 12453) and slowing down function (en 12453)
- Soft start – soft stop
- Optional kit battery backup
- Power supply 230V-24V
Models and Codes
- 11281 | IBIS 230V: Irreversible – Leaf length up to 2,5 mt
- 112810 | IBIS 24V: Irreversible – Leaf length up to 2,5 mt
- 11280/1 | IBIS 24V MASTER: Irreversible – Leaf length up to 2,5 mt – Control unit and receiver 433 mHz
Performance requirements
- Operating cycle intensivo
- Frequency of use 90%
- TOpening time 15 sec.
- Thrust 250Nm
Technical features
| IBIS 230 | IBIS 24 |
|
| Power supply | 230 Vac | 24 Vac |
| Leaf weight | 200 KG | 150 KG |
| Leaf lenght | 2,5 M | 2,5 M |
| Engine RPM | 1400 RPM | 1400 RPM |
| Average absorption | 1 A | 3 A |
| Absorbed power | 250 W | 50 W |
| Condenser | 8 UF | – |
| Operator weight | 9,5 KG | 9,5 KG |
| Noise level | < 30 DBA | < 30 DBA |
| Enviromental conditions | -20/+55° C | -20/+55° C |
| Degree of protection | IP44 | IP44 |
Compositions
Learn more
